home *** CD-ROM | disk | FTP | other *** search
- Path: ix.netcom.com!netnews
- From: dr_baud@ix.netcom.com (Steve Hull)
- Newsgroups: comp.dcom.modems
- Subject: Re: External modems are nonsense
- Date: Mon, 19 Feb 1996 05:29:25 GMT
- Organization: Diogenes Systems
- Message-ID: <4g91pt$o5@reader2.ix.netcom.com>
- References: <Pine.SUN.3.91.960102093642.11497C-100000@cpu3> <4cg61i$810_002@dialupS163.ici.net> <DKoCxH.1tF@giskard.demon.co.uk> <DKuFx1.7s9@bokonon.ussinc.com> <4csl06$81g_002@dialupS171.ici.net> <30f40b80.6246877@news.teleport.com>
- Reply-To: dr_baud@ix.netcom.com
- NNTP-Posting-Host: ix-gra3-23.ix.netcom.com
- X-NETCOM-Date: Sun Feb 18 9:28:36 PM PST 1996
- X-Newsreader: Forte Free Agent 1.0.82
-
- curt@teleport.com (Curt...) wrote:
-
- >> >$Most internal modems look exactly like externals in hardware and software
- >> >$terms, it is impossible to support one and not support the other.
- >> >$(Assuming that we are staying with PC architecture).
- >
- >> Perhaps from DOS's point of view, but not to every OS. And if you don't
- >> believe this, just check with SCO. The reason has nothing to do with
- >> architecture, anyway. Don't ask a Unix (or NT) SysAdmin to reboot the machine
- >> just because the modem went out to lunch. What's OK for one user isn't so
- >> great for 100.
-
- >Most users are not SysAdmins. So whats good business for the many may not be
- >suitable for the one. That sure doesn't mean that everyone needs to buy equipment
- >needed by special purpose situations.
-
- >Curt...
-
-
- I'd like to throw in my two cents worth. I have a Zyxel external
- modem with an LCD panel that constantly displays the current Xmit and
- Rcv data rates. Big deal, you say. Well, I'm one of those poor
- unfortunate souls that has to call long-distance to connect to an ISP.
- Here's a dirty little secret nobody wants you to know: you think
- because you've got a V.34 modem and it says, "CONNECT 28800" that
- you've got a hot connection? Think again bunky! Almost every time I
- connect during the day, I get a true data rate of about 2400 - 4800
- baud, even though both modems successfully negotiated a much higher
- speed. When I see this happening, I hang up and try again later. I
- ESPECIALLY despise those 800 numbers that are supposed to save you
- money. Typically, an ISP will have a lot of local nodes in the major
- cities, but to attract rural customers, they'll set up an 800 number
- and surcharge you to use it. I think Netcom charges about $4.95 an
- hour for you to use their 800 access number. At first glance, that's
- a seemingly better deal than the $6.60 an hour you typically get from
- ATT, Sprint, etc. With the Zyxel, I see that I'm only getting 2400
- baud connections during the day, and even at night when I might
- connect at 14.4, the highest data rate I've ever seen is only 9600 in
- sporadic spurts. On the other hand, if I pay the full long-distance
- charges, I've found another access number where although I connect at
- 14.4, my Rcv data rate is usually on the order of 24000 - 36000 bps.
-
- Without a modem capable of displaying the current data transfer rates,
- my long-distance bill would easily be $100 a month greater than what
- it currently is.
-
- Admitedly, most external modems don't provide this level of
- information, but you shouldn't make blanket statements like, "All
- external modems are nonsense".
-
- - Steve
-
-
-
-